..

材料科学与工程杂志

Characterization and Analysis of Extraction Process-parameter of Pandanus tectorius (Screw-pine) Natural Fiber for Polymer Composites

Abstract

Afolabi Lukmon Owolabi and Puteri Sri Melor Megat-Yusoff

Natural cellulose fiber extract from Pandanus tectorius (Screw pine) leaves is comprehensively investigated as viable alternative for synthetic based fibers made from petro-chemical which is non-degradable and toxic. Pandanus tectorius leaves fiber is extracted and investigated as reinforcement in polymer composite for engineering applications. The habitant are easily found and grown along mangroves and in local jungles located at shallow water. The plant can grow up to 14 meters tall. In order to use these continuous cellulose fibers as reinforcement in polymer composites, the microstructural analysis and yield content analysis were carried out using SEM micrographs to establish the certainty of using them as reinforcement fiber. The alkaline, bleaching and combined alkaline-bleach treatment is utilized in extraction of the cellulose fiber to evaluate the effect on the mechanical property. The cellulose percentage of the fiber was increased as the concentration and soaking time were increased. The extraction process resulted in 73% cellulose percentage for 10 wt.% NaOH and 120 minutes treatment. Hence, it caused 87% increment in cellulose percentage compared to the untreated leaf.

免责声明: 此摘要通过人工智能工具翻译,尚未经过审核或验证

分享此文章

索引于

相关链接

arrow_upward arrow_upward
a